A laptop and PC make your life easier. There are a lot of things that can slowly kill your laptop, such as power cable and unplugging your headphones. In this article, you will find the most common mistakes in laptop care.
Connecting To A Power Supply
A lot of users plug their chargers in the wrong way. Users should never plug it into a power outlet without connecting to the other end first. If you did the opposite, then the power supply can burn out, or it can kill the motherboard of your laptop.
As a result, you should always start with connecting the laptop to the charger. After that, plug into the outlet, then turn your laptop on.
Cheap Replacement Power Supply
You must use an original power supply that is fully suited to your laptop. If you ignore this rule, then it will impact your battery and motherboard.
Wait For Few Seconds After Turning On Your Laptop
Users should be impatient as you restart or turn on their laptop. After showing the welcome message, your laptop still needs some time to fully turn it on. It gives your computer too much pressure, and it can not handle it. It can also distort data.
If your laptop still works slowly after a few minutes, you can check the list of startup programs.
Software Updates & Storage
Users should give the operating system the treatment it deserves. It will help your OS to run smoothly. You should keep track of the software and application that you are installing. Users should clean the registry often to get rid of temporary files. You should always use original drivers because they are fully compatible with your computer.
Hibernation Or Sleep Mode
Before you put your laptop in a case and go somewhere, users should make sure that it is in shutdown mode. Sleep mode or hibernation mode is only good when you are using the laptop at home.
Sleep mode is not recommended for transporting a laptop because it can not handle active movement well. It can also lead to some software damage.
Outdoor Usage
Both laptops and PCs hate the Sun. It can create problems with overheating, and its rays can also kill your display. If you keep your laptop close to a window or in direct sunlight, then you will not get a bright and saturated picture soon.
Cords
If your cords are twisted, wrapped, or bent, then do not expect to serve them for a long time. Sharp edges can easily cut into the cords and ruin them. Bending also does the same thing. However, you can bundle the cord over itself or the power adapter. Users should also make sure that these cables are attached to the motherboard and do not hang loose.
Installing & Uninstalling
When you install and uninstall programs, they take up space on your disk. This process is known as disk fragmentation. It slows down the work of your software. Users can use a disk defragmenter to solve this problem. You can also use some tools that delete temporary and rarely used files.
Heat
Heat is your laptop’s worst enemy. Keep your laptop cool on a firm and flat surface. If the air vent is situated in the lower part of the laptop, then just a flat table will not be enough for support.
Users can get an additional cooling system using a special stand along with built-in fans. This way, you will extend the lifespan of your laptop and keep it quiet.
Conclusion
These all factors can affect the lifespan of your laptop. You can use these tips to improve the productivity of your laptop. These are the things to consider while taking care of your new or old laptop. It will benefit you in the long run.
Read Official Blog Post – Top Mistakes That Can Destroy Your Laptop Slowly
