The LED light bar is a special process in which the LED light is welded on a copper wire or a ribbon-shaped flexible circuit board, then connected to the lamp of the power source.
It is named after it is in the shape of a sunlight bar when it emits light.
The initial process is to solder the LED on the copper wire, then attack the PVC tube or use a kit to directly shape it. There are two types of round and flat.
The name is the same as the amount of copper wire. Therefore, the two strips are distinguished by the shape of the strip.
The line is called the second line, and the front is rounder and rounder, that is, the first two lines;
the word flat before the flat is two flat lines. Later, it was developed to use flexible circuit boards or FPC as a carrier to try.
Because of its simpler processing technology, easier standardization, longer service life, higher color, and brightness,
it gradually replaced the old processing technology, gradually became the trend because of the highest The light strips are generally welded with LEDs, so there are many so-called LED light strips, but the term light strips are too long and simplified.
Main features and advantages:
1. Soft, often a crimped wire;
2. The connection can be cut and extended;
3. The bulb and circuit are all covered with flexible plastic, which has good insulation and waterproof performance and is safe to use;
4. Weather resistance Strong;
5, not easy to break, long service life ；
6, easy to make graphics, text, and other shapes ；
LED light strip Application range:
has been widely used in construction, bridges, roads, gardens, courtyards, floors, roofs, furniture, cars, ponds, water Down, advertisements, signs, signs, etc.
And lights add endless joy and festive atmosphere to various holiday activities such as Christmas, Halloween, Valentine’s Day, Easter, July 4th, and so on.
With tenacious vitality, it enters the five advantages of advertising, decoration, construction, trade, and gifts, and is exported to Japan, the European Union, Australia, and other countries and regions.
It is widely used in the construction of corridors, bridges, railings, hotels, forest gardens, dance halls, advertising decoration places, etc.
LED tape specifications:
conventional two-line circle, three-line circle, three-line plane, four-line plane, etc.; colors are red, green, blue, yellow, white, seven colors, etc. Diameter: 10mm-16mm
0603: Converted to a weight measurement system of 1005, that is, the length of the LED element is 1.0mm and the width is 0.5mm. The industrial name is 1005, and the English name is 0603.
0805: converted to metric, it is 2125, that is, the length of the LED component is 2.0mm and the width is 1.25mm. The industry abbreviation is 2125, and the British system is called 0805.
1210: converted into weights and measures, it is 3528, that is, the length of the LED element is 3.5mm and the width is 2.8mm. The industry abbreviation is 3528, and the British system is called 12100.
3528；This is commonly referred to as the measurement system, that is, the length of the LED component is 3.5mm, the width is 2.8mm, and the abbreviation industry code is 3528.
5050: This is also called the metric system, that is, the length of the LED component is 5.0mm, the width is 5.0mm, and the industry abbreviation is 5050.