Tyres that are not adequately inflated can excessively wear when driven out on the road, which may be very dangerous for you. That is one of the most significant reasons that it is curial for everyone to know how to check the air pressure in their vehicular tyres. The tyre specialists working in tyres centre of reliable companies like Rathdowney Quick Fit say that tyres possessing incorrect air pressure may frequently lead to some other problems like

improper car handlinglower gas milagelessened road grip, and many more

So, here is an ultimate guide for your information on checking tyre pressure.

How to check the accurate air pressure of your tyres?

Checking air pressure in vehicular tyres is not a difficult task, though. One can easily do it themselves or take their car to a nearby tyres centre specialist for this. However, below are the steps that are usually taken to check tyre pressure.

1.    Check for suggested PSI.

Checking the manufacturer’s recommended PSI beforehand is crucial to getting started with air pressure checking to know if your tyres are either under or over-inflated. PSI generally stands for the full-form of Pounds Per Square Inch. The PSI for your vehicular tyres is mainly determined by the vehicle’s manufacturer manual and the tyre usage.

2.    Remove the valve cap of your tyre and then insert the pressure gauge into it.

Once you know the recommended PSI, you have to remove the valve cap from any one of your tyres. Then you have to insert the pressure gauge into the valve stem until you stop listening to the hissing sound and see a precise reading on the gauge meter. Write down the reading you got on the meter for that tyre anywhere. Then repeat the same process for other car or van tyres.

3.    If required necessarily, let the extra air out.

In case, from the reading, you figure out that any of your tyres is over-inflated, then it is suggested you let the extra air out of it. For this, you will have to press the metal pin present inside the valve stem with a fine screwdriver and wait for a minute so that the extra air escapes out smoothly.

4.    Refill the new air if essential

While in another case, if you find any of your vehicular tyres under-inflated, you may utilize a specific air compressor to refill the air in it. For that, you will have to press the hose of the air compressor onto the valve stem and hold it there until the air pressure reaches the correct PSI (suggested as per your vehicular manufacturer’s manual). Stop refilling further air when you get recommended PSI reading on the pressure gauge.

Essential Considerations While Checking Air Pressure in Car or Van Tyres

Always make sure that you accurately know the exact tyre pressure for your vehicle tyres beforehand. You will get all the details and information of your vehicular PSI from its manufacturer’s manual.The air pressure in the tyres tends to rise slightly when the vehicle is driven on the road, and its tyres get warm, so it is best to check tyre pressure rightly before starting a journey, if possible.In order to measure the current air pressure in your tyres accurately, you can either use a portable tyre inflator, handheld pressure gauge, or an automatic inflator readily available in some fuel stations or tyres centre.You should always carefully remove the tyre valve’s dust cap and firmly push the connector on it so that you get the correct reading on the measuring device.If you are using the automatic device to measure your tyres pressure, you can put your desired pressure reading on the machine. The machine will inflate your tyres accordingly until your entered reading gets achieved. And afterward, don’t ever forget to replace the dust caps after this procedure.

0