We often talk about making motorcycles more visible to other drivers, but the same principle applies to daily commuter cars. Adding a pair of DENALI Electronics B6 brake lights to your car can help increase your conspicuity in traffic and reduce the chance you get rear-ended.
Installing these lights requires tapping into the OEM harness, but our CANsmart controller makes it easy without damaging your vehicle wiring. CANsmart also declutters your handlebar switches and offers a variety of settings for all your accessories.
CANsmart Controller
Harness the flexibility and intelligence of your BMW CANbus electrical system to make the installation of accessories drastically easier with DENALI's CANsmart Controller. This innovative device creates four intelligent accessory outputs that can be controlled directly from your bike's factory switches or the CANsmart Accessory Manager Software.
The CANsmart Controller is the most advanced CANbus power and control solution for the BMW motorcycle market. It connects to the factory CANbus wiring system and provides power and controls to auxiliary lights, a high-power horn, and an auxiliary brake light. Each CANsmart circuit is electronically fused and ready to use right out of the box. The CANsmart can be programmed to provide the functions you want to use for your DENALI lights, horn, or other 3rd party accessories.
You can use the CANsmart with most three-wire LED lights and the CANsmart also supports two-wire LED lamps (but they won't dim). Each CANsmart circuit has a separate power and dimming lead that can be used to control a pair of DENALI spotlights or other third-party accessories. The CANsmart can be set to strobe your auxiliary lights when you sound your horn, activate your brake light during deceleration, or flash the auxiliary brake light in one of four different flash patterns (including California legal flash rate).
CANsmart is manufactured for DENALI by Hex Innovate, the company that makes the GS-911 diagnostic tool and EZCAN controller. Hex Innovate also manufactures a similar product called the CANbus Activator which is a little less expensive than the CANsmart.
The CANsmart comes complete with a bike-length spotlight wiring loom, a horn loom, and an extension cable for the brake light as well as all necessary connectors and adapters to get you started. It's important to note that you will need to cut your vehicle's existing wires to tap into them for the switch feed. This can void your vehicle's warranty, so we highly recommend you consult a certified mechanic before performing any modifications to your bike. The CANsmart is backed by a 5-year warranty against manufacturer defects.
DialDim
This lighting controller does so much more than simply turn your lights on and off, it also allows you to control their intensity level. It also displays the current setting and even offers a smart feature called Stealth Mode that can keep your auxiliary lights on at zero percent brightness, then immediately switch to full intensity with your factory high beam switch when you activate it.
Its multicolor halo display shows you exactly what setting your lights are on, which can be useful for when you’re in a hurry or not sure what the settings are set at. This industry-first design features electronically fused circuits with a battery monitor that can show you real-time feedback about the health of your batteries (with a red LED turning on to indicate there’s a problem) as well as automatically shut off your auxiliary lights if they draw too much power.
The DENALI Electronics Coupon DialDim is available in a variety of plug-and-play kits, making it an easy upgrade for any powersports vehicle with an existing LED lighting system. The kit includes a controller harness and switch, (4x) five-foot plug-and-play light extensions, and a handlebar switch mount. Simply add your choice of DENALI LED light pods to complete the package. Don't forget to apply the exclusive DENALI Electronics Coupon for added savings on your purchase.
SoundBomb Horn
A horn isn't just a nice-to-have, it's a critical safety feature. Whether you're roaring down the highway on your Harley or navigating challenging off-pavement trails on your BMW, it's vital that you can be heard over other traffic and even very loud mooing livestock. DENALI offers two separate horn families in the SoundBomb family of products that are designed to fit a wide range of power sports vehicles.
The SoundBomb Mini delivers 113 decibels of attention-getting low-tone noise in a much smaller package than the factory horn on many vehicles. It's also a direct Plug & Play upgrade and doesn't require the use of an additional relay or wiring harness.
Compared to a dual horn or the flat horns found on some motorcycles, the SoundBomb Mini is much easier to mount in a tight space. The air compressor and horn are separated by a durable hose, so installers can put them where they make the most sense on the vehicle while still maintaining a clean look.
Another benefit of the SoundBomb Mini is that it requires a lot less power than other horns. That makes it a good choice when your bike is already struggling to manage its electrical load. It also means that it can be installed without a relay when your powersports vehicle is equipped with a high-current accessory controller like the DialDim.
If you don't have the space for a full-size Powersports Horn, or you prefer the low-tone tone of a car horn, DENALI has that too with the SoundBomb Split. It's similar to the one-piece SoundBomb but has the air compressor and horn separated by a hose. That means you can install it in a space as small as 3.5 inches square and 2.5 inches deep.
The SoundBomb Split can be connected to a DENALI CANsmart controller for an enhanced ride. With the controller connected, you can set your horn to automatically strobe when the brakes are applied or power accessories like a GPS, phone charger, or heated gear. Plus, you can toggle between different modes by clicking the turn signal cancel three times or by grabbing the wonder wheel and swiping left/right.
B6 Brake Light
Auxiliary brake lights are a great way to add a little extra rearward conspicuity while reducing the risk of being rear-ended by distracted drivers. DENALI’s B6 LED Brake Light was purpose-built to provide more visibility out of the smallest, slimmest housing possible 1-watt Light Emitting Diodes generate improved brightness without adding much bulk. This version of the popular product has been updated to operate at full intensity as a running light and about half intensity as just a brake light. It’s up to you which circuit you choose to run. It’s also the optimum auxiliary brake light to use with a CANsmart Controller (sold separately) because it can take advantage of advanced flash patterns and deceleration-activated auto-brake light functionality.
The kit cleanly mounts a pair of B6 LED pods above or below your license plate, re-using the existing plate mounting holes. They’re unbelievably bright, but the housing is so compact they practically disappear once mounted on your license plate. They’re also incredibly easy to install, thanks to waterproof micro connectors and posi-taps that make it simple to plug and play straight into your bike’s brake light circuit. For CANsmart users, the orange wire connects to your CANsmart accessory controller which controls programmable flash patterns and deceleration-activated automatic brake light functionality.
Whether you use it with the CANsmart or not, this is one of the best, most affordable ways to improve your safety while riding on public roads. There’s no easier, safer way to control lights, horns, and other electric add-ons for your motorcycle without having to mess with the factory wiring loom. So, if you’re ready to get a leg up on the competition, give the B6 Brake Light a shot! Don't forget to utilize the exclusive Automotive Discount Code for added savings on your purchase.
Conclusion
Several must-have DENALI electronics for your vehicle will enhance your driving experience. These include the DENALI D4 2.0 TriOptic LED Light Kit, the DENALI SoundBomb Compact Dual-Tone Air Horn, and the DENALI CANsmart Controller. These products offer improved visibility, enhanced safety, and increased convenience while on the road. With the addition of these DENALI electronics, you can enjoy a more comfortable and secure driving experience.
