You may believe that all you need to consider when installing a kitchen glass splashbacksas part of your kitchen renovation is the size, design, and colour of the glass. However, you may need to make additional selections before getting the proper backsplash installed securely. In this article, we will discuss three key considerations for kitchen glass splashbacks in brief.
- Safety Regulations
Kitchen glass splashbacksin the kitchen must be durable and long-lasting. You don't want to spend money on a backsplash just to have it fracture or break when anything is unintentionally knocked against it. Kitchen glass splashbacksthat have been damaged might be difficult to repair. It's possible that replacing a cracked or broken backsplash is the only way to make it seem like new again.
More significantly, you must consider the safety concerns that arise from the kitchen's surroundings. Splashbacks in kitchens are frequently exposed to heat and steam. Their glass must be able to endure these temperature swings.
- Cooktop and Oven Considerations
If any part of your kitchen glass splashbackswill be directly next to or behind your cooktop or oven, you'll need to take extra precautions during installation. If you have a gas supply rather than an electric or induction supply, this is a bigger issue. Even hardened safety glass can transfer cooking heat to the wall on which it is installed. Depending on how close the glass is to your cooktop or oven, you'll have different responsibilities.
You may not need to install any protective measures if the distance is sufficient for the heat to escape before it touches the glass.If there is a danger that cooking heat may travel straight to the glass and cause it to get excessively hot, you may need to apply a fire-resistant material to the wall before installing the splashback, such as boards. Heat from the kitchen glass splashbacksis kept out of the wall using this boarding.
- Power Point Locations
Spaces may be carved into kitchen glass splashbacksto fit around electrical outlets in your kitchen. However, you should normally do this before ordering a backsplash. After a toughened safety kitchen glass splashbacks has been produced or installed, you usually can't do this. The gaps you'll be cutting into a backsplash must be precisely measured and carved.
So, at the absolute least, you must know the exact location of your power points before placing an order. It's a good idea to have your electrician check your electrical points before ordering the kitchen glass splashbacks, just to be cautious. If you need to make last-minute changes to planned electrical locations, this will help you avoid problems.
Conclusion
If you aren't planning on moving or adding power outlets to the area, you can simply get a kitchen glass splashbacksthat matches your current electrical setup. If you're going to modify any power points on the wall that will hold the kitchen glass splashbacks, you should take care of this beforehand.
