Who doesn’t like to have an assistant to ease out their work? Everybody likes it! Similarly, there is a Netgear Installation Assistant to help you with the setup of your Netgear extender in an easy way. Netgear Extender will help you to extend the network signal in the dead zone areas as well. It means, there is no need to book a favorite spot to work with the proper range of internet. You can have it anywhere with the Netgear extender. So, once you have bought the Netgear extender, you need to complete the steps mentioned in this guide with the help of the Netgear Installation Assistant. So, let’s get started!
Steps For Setup With Netgear Installation Assistant
Following steps are the detailed steps to complete the setup with the Netgear Installation Assistant. It will guide you about the minute things as well so that you don’t get stuck somewhere, or end up with the wrong result.
Step 1: First, place your Netgear extender in the same room as that of the router.
Step 2: Plug your Netgear Extender into the electrical outlet.
Step 3: Then, connect the extender to the system using the ethernet or wireless method.
Step 4: Now, launch the web browser of your choice, preferable Google Chrome.
Step 5: In the address bar, enter the address as www.mywifiext.net.
Step 6: Hit Enter key on the keyboard.
Step 7: This will open the Netgear Installation Assistant to help you in the setup process.
Step 8: In the setup wizard, click on the button “New Extender Setup”.
Step 9: Fill in the required information on the next page.
Step 10: Click on the Continue button.
Step 11: Then, the next page will show you the list of the existing available WiFi networks.
Step 12: Select the name of your network which you want to extend with the Netgear extender.
Step 13: Then, the prompt will ask you for the existing network password.
Step 14: Enter the current password for your existing WiFi network and click on the Next button.
Step 15: On the proper establishment of the connection, connect any wireless device with the extended network.
Step 16: If your device gets successfully connected with the extender’s network, click on the Next button.
Step 17: The next page of the wizard will show the message, “Extender is Connected and Ready.”
Step 18: Close the Netgear Installation Assistant window, and unplug your extender.
Step 19: Now, connect the extender near the dead zone of the network.
Step 20: Try to connect your device with the extender’s network.
Step 21: If connected successfully, location is fine, otherwise, move the extender’s towards the router for better access to the network.
Setup Is Easy!
So, this completes the setup of the Netgear extender with the help of the Netgear Installation Assistant. You can see how easy it is. The Netgear Installation Assistant will guide you through the steps by itself and you will end up with a successful setup. In case you are facing any issue with the setup, dial a toll-free number, and get the instant solution for your problem. So now, no more network problems Netgear Extender.
