Such Canon Printer Error Code 5800 can be aggravating and harm your operation. There are several methods for dealing with Canon printer issues, but only a few are easily accessible. The next post describes a simple method for removing this sort of mistake.
Some users are not interested in technical matters and will not perform such tasks. Some of us are also afraid of doing tasks such as technical troubleshooting on these gadgets. Those who are unable to do technical troubleshooting on Canon printers should contact Canon Printer Customer Support, while those who wish to troubleshoot on their own could try:
Steps to fix Canon Error Code 5800:-
Replace Waste Ink-Absorber-
Replacing waste ink-absorber will make a positive impact in such cases and will help us eliminate many such errors.
Apart from that, proceed with additional instructions:
Press the “Power Button-
While the printer is OFF and connected to the main power supply board. Press Power Button while holding the Stop/Reset button on it.
Press “Stop/Reset Button-
When your Canon printer is ON, press the “Stop/Reset” button twice, while pressing and holding the power button.
Move into Service Mode-
While performing the above steps your printer will go into Service Mode.
Press the “Stop/Reset” Button-
When the power light is green, press the Stop/Reset button twice
(Each time pressing Stop/Reset Button will lid the LED light in orange and green, starting with orange).
The number of the Reset button pressing LED function remarks:
- 0 time Green Power off
- 1 time Orange Service pattern print
- 2 times Green EEPROM print
- 3 times Orange EEPROM reset
- 4 times Green Waste ink counter reset
- Turn off the printer.
(It must be turned off) then turn it on again. Now check the Canon Printer Error Code 5800 is resolved. If not, then go to the mentioned blog.
