Toshiba error code 4011 occurs when you are doing any job with your printer, and the handling is wrong or the deleting of running printing job accidentally. However, the reason behind the error is so many, but the main one is the wrong way to execute the printing session which leads to pop up the message of the job was cancelled that is error 4011. In this blog, the Toshiba Printer Repair Support Service team are explaining the two ways to remove the error from your system promptly. Thus, to get the solution, you need to follow the below-given steps in a sequence.
Reasons for the error code 4011
- Faulty Printer Driver Settings
- Bad Network
- It mainly shows a sudden error you made during the printing session
Steps to resolve the problem
1. Fixing a Bad Network Problem
If this error message displays on your computer and only one LED light is blinking on the Toshiba printer, then a bad network is the main problem. On such occasions, you can use the following steps to solve this poor connectivity issue and thus fix this error code:
Check whether the other end of the network cable is unplugged from the network jack Make sure that the cable is plugged correctly into the router and the network switch Next, you can try to connect the cable into a different port on the router or network switch And finally, check the power switch of the router or the network If the error code 4011 occurs again even after implementing the steps as mentioned earlier, you can try out the next method.
2. Resolving Faulty Driver Settings
You should secure the proper settings of the printer terms at the time of printer installation. Any mistake in the printer settings leads to the result in the flashing of this bothersome error code on your Toshiba printer. If your device is presenting you this error message because of incorrect settings of the device, try out the following steps to resolve it:
- First of all, you need to ensure that you have chosen the right printer
- Inspect the size of the paper
- If the copier demands a user code, then you need to enter it correctly
- Check whether the papers are placed successfully in the tray
- Also, ensure that the proper paper tray has been selected
In case, the issue persists even after executing the steps which are mentioned in the above section then we recommend you to connect with the support team to get the best resolution to your printer related problems in minimal time by Dial Toshiba support 365 toll-free number, you can connect with us whenever you need professional guidance by the skilled experts. We are available 24×7 to assist you.
Source URL: Printer Error Code 4011
