Disclaimer: This is a user generated content submitted by a member of the WriteUpCafe Community. The views and writings here reflect that of the author and not of WriteUpCafe. If you have any complaints regarding this post kindly report it to us.

A drainage system is a type of system which is installed in every house. There are plenty of drainage problems that require an instant solution as well as professional plumbers too. Blocked drains will cause inconvenience for you in using water, as water will run very slowly. There may be a variety of reasons for a blocked drain. But it is not a serious issue which you can’t resolve. You can resolve this issue on your own with the help of using some simple home remedies or some professional techniques. Also, you can hire professional services for drain repair in Reading

Below are the tips for repairing blocked or clogged drains:

There are many techniques that you can use to repair your blocked drain on your own. This article includes tips about repairing a drain. Before you move to repair a drain, keep in mind that you need some tools and equipment for dealing with a clogged or blocked drain. Here are some tools mention below:

  • Plunger

  • Petroleum jelly

  • Stiff brush

  • Wet cloths

  • Bucket

  • Commercial drain opener

  • Wire coat hanger

  • Drain and trap auger

Work on the overflow vent: 

First and foremost, you should cover the overflow opening in the tub or basis with the help of a wet cloth. Mostly the sinks of the kitchen do not have an overflow vent. Therefore, you can plug another drain of basin or sink opening with the wet cloth if you are working on one of two side-by-side. 

However, some of the homes have two bathrooms in adjacent rooms which may be connected with the same drain. In this type of situation, you first have to block the other side of the sink at both its overflow vent and drain too. 

Moreover, shower facilities and bathtubs also have overflow vents. You must cover all of them with a wet cloth so that when you use the plunger then it will work properly or smoothly. 

  • Use a Plunger:

When you are using the plunger make sure to fill the clogged sink or basin with water so that you can cover the head of the plunger easily. Then coat the lip of the plunger by using petroleum jelly because it helps to create a better seal. Rapidly pump the plunger up and down when you slide the cup of the plunger over the drain opening. Then note that if you are feeling the water running in and out of the drain or not. This is called the back and forth water pressure. Therefore, it can eventually build up enough force to unclog or dislodge the drain whatever is blocking it from working smoothly. 

Moreover, water will rush out in flow when you, again and again, jerk up the plunger very fast. If it does not then you should try this method again at least 2 to 3 times before you use the other method for repairing your drain. 

  • Try using a drain chemical or a snake may be:

If you are failed to repair the drain with the usage of a plunger then you should prefer using the chemical drain opening method. You should not use chemical drain that is completely blocked because these chemicals contain caustic which can drastically harm some of the fixtures. You can skip this method if you do not want to create further damage. Because then you may have to call professional services for resolving the issue.

Moreover, if you are facing block drains because of grease then you should try this home remedy. For this remedy, you have to pour ½ cup of salt along with ½ cup of baking soda which is followed by a teakettle of boiling water. Leave this mixture overnight. If still, you are not able to unblock the drain. Therefore, then you should prefer professionals for drain unblocking service.

Source: https://www.repairadrain.co.uk/drain-unblocking-service/ 

Login

Welcome to WriteUpCafe Community

Join our community to engage with fellow bloggers and increase the visibility of your blog.
Join WriteUpCafe