As of now, HP Printer 49 Service Error has become a torment for many HP printer users. It’s a standard fault that sometimes affects a LaserJet line printer. After a lot of analysis and understanding by pro technicians, they found that this was primarily due to three reasons: a technical error, a matter or a firmware fault, a connectivity issue. Along with the Code 49 error, secondary faults i.e 49.4C02, 49.4CF2, etc are linked with. Have you been using an HP printer and faced similar errors showcasing on the printer head? Then know how to fix the HP 49 Error Code in this article where we have interviewed several pro printer technicians before sharing the guidelines to fix the HP 49 Service Error.
Yeah, some steps are suggested to settle down Error Code 49 of your HP Printer
Step 1: Press the “Cancel Job” to clear the memory
- As recommended by HP printer technicians, we highly recommend that you press the “Cancel Job” button on the printer. This will allow the printer to clear up the printer’s memories.
- Now switch off the printer’s power, Afterwards a while and then turn it on again to confirm whether or not the printer monitor still displays the Code 49 error. If this method doesn’t work, switch to Step 2.Step 2: Test printing from different software
- In this step, you’re recommended to test print from a different software application. If you find that the printing is done perfectly, go to the prior application and try to print a different file. This will help you to check whether the printer is doing its job perfectly without showing the same error.
Step 3: Opt for the Power-Cycle method
- Acknowledged to be the most common suggestion yet the most effective one- the power cycle process can be excellent to resolve any errors whether it’s 49 or something else.
- Disconnect all the cords and connections attached to the printer. This step is a must if the error code persists with different software applications and printing.
Step 4: Remove the DIMMs from the printer
- Turn OFF the printer and remove all the DIMMs as well as the third-party DIMMs from the printer for removing all printing memories.
- Keep the firmware DIMM and don’t remove it.
- Now remove all the EIO devices before turning ON the printer.
- If you find the Code 49 error is resolved, it’s strongly advised to install each DIMM along with the EIO device separately while keeping the power OFF.
- Now, switch on the power of the printer to start printing once again.
- If you notice that the DIMM or the EIO device is the reason behind the error, then replace it.
- Even after doing that, if the issue refuses to go away, then according to the HP technicians, replace the firmware DIMM followed by replacing them formatter of the LaserJet printer.
So we hope that the details provided in this were essential for each of you and if you all are happy with the steps discussed above, then please do share this with your friends, so that they can also get relief of the Hp printer error and all clients are suggested to take Hp printer help from the authorized Hp printer service team.
Furthermore, you can fix the 49 error code in your HP printer.
Source URL: HP Printer 49 Service Error
