Have you ever experienced Canon Printer error b200 on your Canon Pixma printer? Looking for the causes of the error message? Want to get a step-by-step guide to resolve Canon Printer error b200? It is very frustrating and disappointing when you get an error message during printing a document. Well now, you do not need to be worry! Here, you get the troubleshooting tips that you need to follow to resolve Canon Printer error b200.
Canon printers are known for their ultimate performance all over the world. If you have a Canon inkjet printer then there are chances that your device shows Canon Printer error b200 at some point. It is mainly caused due to problems with the voltage, print head, or temperature. Canon Printer error b200 indicates the catastrophic error with your Canon printer.
Steps to Resolve Canon Printer error b200
There are several things that you can do to fix the printhead issues and resolve the Canon Printer error b200. Follow the below steps to fix Canon Printer error b200 before replacing your entire device:
- Reset your Canon printer. For this, you need to unplug your device and leave it disconnected for about half an hour. A long reset of your printer allows it to cool down and restore everything to the appropriate position before turning on the device.
- Eliminate all the obstructions. There may be a possibility that something is disrupting the connection of the printer head. For this, you have to open the printer door and disconnect the printer head and place it again after some time.
- Clean the print head of your printer manually. For this, you can use pure alcohol or non-oil-based cleaner. To clean the printer, use a microfiber cloth. Rub it gently onto the contacts. Establish the connection again once it dries.
- Clean the printer head by using the maintenance options of the device. It is very useful when the printer head is blocked.
- Try to re-install your printer drivers and software by following the instructions from the official Canon support page.
- Change the old ink. If the ink is stored for a long time in the ink cartridge of the printer, then it becomes hardened inside the print head. In that case, you can also run it under hot water until clean water comes from it. Dry it with a paper towel and insert the print head again into your printer.
- Turn off the printer and verify the working of the power cord and other things attached with the printer. Disconnect the USB cable, power cable from the printer and reconnect the printer to the USB port and plug it again.
- Change the new ink cartridge if there is any fault in it as faulty ink cartridge triggers Canon Printer error b200.
- If after following the above steps, you again face the Canon Printer error b200 issue then it means that you need to change your entire printer.
Hopefully, the above-mentioned steps will help you in fixing the Canon Printer error b200 issue. If after following these steps, you are not able to resolve Canon Printer error b200 then there is a possibility that there is damage within your printer interior.
