I want to modify VAPORESSO GEN settings. How do I do that?

Vaping isn't just for the pros. vaporesso gen provides the best and most accessible vaping experience. You will feel a distinct sensation in your hand thanks to the anti-fingerprint rubber coating. The device is lightweight at only 107g.

VAPORESSOGEN comes with the powerful AXON chip. This chip can generate a maximum output of 220W. The chip provides extra during each inhale making VAPORESSOGEN a powerful punch. The AXON chip offers intelligence interactive to the user, taking the simple-operating experience up a notch.

These are the steps you must follow before you begin with a new GEN. These are the instructions you need to follow in order to quickly get your family on board with your device.

General Settings

Step 1: Fill the E-juice Tank and place it.

The drip tip can be removed from the drip cap to fill your favorite E Juice uk.

Step2: Power on the devices

1)Press the fire button five times in 2s. Turn on and off

2) Keep pressing the fire button 3 times more to lock and unlock up and down as well as mode and mode buttons.

3) To unlock the mode buttons, press and hold three times the mode button.

4) Once a tank is installed, it will identify the coil resistance. To reset the setting, press up (+) or down(-).

Press the fire button to start vaping. Do not vape for more than 10 seconds.

Step3: Choose your mode

PUL: This mode (default), continues to enhance flavor with large clouds.

ECO: Use the Power ECO mode to extend your battery life.

STC: SMART temperature control mode, Automatic

Recognize Material, Only one step to complete setting

DIY: This section allows you to choose between traditional VW (H.N.S), VV (bypass mod), SP, or CCW (superplayer mode).

SET: System setting, including puff counter, brightness, flip screen, default, version.

SMART FUNCTION

If the coil resistance is very low, it will give you the option of switching to SP (superplayer mode).
The system will offer you an option to change to ECO (Power ECO) if your battery level falls below 40%.
When the tank is installed, it will offer Smart TC mode (Smart TC), automatically.

OPTIONS TO DIY MODE

VW-H/VW–N/VW–S (Variable Wattage Mod – High/Normal/Soft: If you switch between different resistances, it will choose the best wattage.
VT-SS/VT-NI/VT-TI: Variable temperature control mode for Stainless Steel/Nickel/Titanium material.
VV (Variable Voltage mode). To match the resistance of your coil, you can manually adjust the voltage. A coil with a greater resistance will need a higher voltage.
CCW (Custom Curve Of Wattage Mode): You can adjust your curve of wattage output using the up/down buttons. After you've moved to the next bar press the fire button quickly. Once the setting is complete, you can save it and exit by pressing the mode button.
BP (Bypass mode), direct out voltage mode, is dependent on the battery level. The supported coil resistance range is 0.05 to 5.0ohm.
SP (Super Player mode). This mode allows for a greater resistance range, 0.03O to 5.O. It can be used with main RDA tanks.

CAUTIONS

Please turn off the device when it isn't being used.
Keep your charging device charged and close by
You should not drop, throw or abuse your device.
You can use a standard USB output charger with the right charging current and voltage.
Avoid contact with liquids, flammable gases, and water.
Avoid direct sunlight, moisture, and mechanical shock.
Avoid exposing your device to extreme temperatures. Temperatures range from -1060 to 14140 while using the device, 0+55/32-131 when charging it, and -1045/14113 for storage.
EEE Recycling: This product should not be considered household trash. It should instead be taken to the proper collection point for electronic and electrical equipment recycling.
Recycle the product battery: It should not be disposed of in landfills. It should instead be taken to the appropriate site for used battery recycling.