The Netgear EAX12 setup only use is to increase the coverage of your home Wi-Fi. To put it simply, it helps all the gadgets in your house acquire a strong wifi signal by connecting back to your router.
This usually translates to faster speeds, however the EAX12 isn't especially quick by Wi-Fi standards; on the 5GHz radio band, top-tier routers and extenders may handle connection speeds of up to 4,800 Mbits/sec, whilst this one can only reach a maximum of 1,200 Mbits/sec. It's still more than enough for the majority of home networks, though, and you won't get any faster for the money.
Netgear EAX12 Setup Using WPS Method
The steps below must be followed if you want to set up your extender using the WPS method:
- First, confirm that the range extender is within the coverage region of the main router.
- Next, switch on both WiFi devices after inserting them into their respective outlets.
- As soon as they turn on, look for the “WPS” button on them.
- Found them? Is that correct? Thus, after hitting the Netgear EAX12 button, press the button on the router.
- The configuration of your range extender is complete.
Note:- If you need any assistance regarding your Netgear EAX12 wifi extender so contact our technician or visit the official website
How do I set up my Netgear WiFi extender without WPS?
- Link to the Extension
- When the Power LED on your Netgear WiFi extender illuminates, plug it in.
- Connect to the “NETGEAR_EXT” or a comparable WiFi network using a computer or mobile device.
- Launch a web browser:
- On the linked device, launch a web browser (Microsoft Edge, Mozilla Firefox, Safari, or Google Chrome).
- Go to the Web-based Configuration Page:
- Enter the Netgear extenders default web address in the browser's address bar: Hit the Enter key.
- Obtain an Extender login:
- An inquiry requesting your username and password will appear. Make use of the standard login information, which is usually:
- Login as admin
- Password: password
- Adhere to the setup wizard.
After logging in, the Netgear Genie setup wizard or a comparable one should appear.
Netgear Extender EAX12 Setup via Manual Method
- During the setup process, place your Netgear EAX12 extender in the same room as your WiFi router.
- As soon as the Power LED turns solid green, plug the extension into a power outlet.
- Make sure that your computer or mobile device is connected to the “NETGEAR_EXT” or a comparable WiFi network. If the extension asks for a password, enter the default one found on the label.
- Launch a web browser on the gadget that is attached to the extender.
- The default web URL for Netgear extenders is http://mywifiext.net or http://192.168.1.250. Type it into the address bar and hit Enter.
- When prompted, provide the username and password.
- Login as admin.
- Password: this one
- Select the WiFi Network to Grow:
- You will be prompted by the setup process to choose which WiFi network you wish to expand. Pick your
- After providing the WiFi password for the network you currently use, select “Next” or “Continue.”
- If you need to set up other parameters, just follow the directions displayed on the screen. Depending on your preferences, you can modify the default settings or leave them as they are.
- Reconnect your devices to the newly created extended WiFi network after the extender configuration is finished. “_EXT” or a similar extension is usually included in the extended network name.
- Make sure the extended WiFi network is properly connected to your devices. Verify that the link is functioning as intended by testing it.
- Visit the Netgear support website to see whether your extender has any firmware upgrades. Update the firmware by following the instructions if there are any available updates.
How do I log into my WiFi extender?
- Link your gadget to the network of the WiFi extender.
- Launch a web browser.
- In the address bar, type the extender's IP address, which is typically located in the manual.
- Enter the username and password to log in (the manual usually contains the defaults).
- To adjust WiFi settings, navigate to the settings page.
- Reconnect devices to the expanded WiFi network after saving your settings.
How can I set up NETGEAR EAX12?
Positioning:
To ensure a robust signal, place the EAX12 within range of your current WiFi router.
Turn on the power:
Turn on the EAX12 by plugging it into a power outlet.
Link to the Extender:
Connect to the extender's default network using a WiFi-capable device (the extender has the password and SSID).
Interface for Access Setup:
Launch a web browser, type in the default IP address of the extender (e.g., http://192.168.1.1), and use the default login information (see the handbook) to log in.
Establish Configuration:
To choose your WiFi network, input its password, and create a new SSID and password for the extended network, follow the on-screen instructions.
Link Up Devices:
Reconnect your devices with the new password and SSID to the expanded WiFi network.
How do I update my EAX12 firmware?
Link to the Extender:
Verify that your gadget is linked to the WiFi network of the NETGEAR EAX12.
Web interface for Access:
Launch a web browser and find the extender's IP address.
Sign in:
Enter your username and password to access the extender's web interface (the default is frequently “admin”). Verify the handbook for accurate information.
Locate the Firmware Update Section:
Look for a firmware update section in the settings menu.
Install and download:
Installing the latest firmware version should be an option if one is available for download. Observe the directions displayed on the screen.
Hold off and check:
Permit the updating process to finish. Check the firmware version after logging back in to make sure the upgrade was successful.
