Check the accessories list as well as the devices chart to see if the accessories are total, After completion of the vehicle tail door setup, Please lengthy press the tail door to set up the switch button, In 3-5 secs the “beep” has a lengthy noise. Allow the take care of loose as well as press the end door. There is 2 “beep”, that is, the tailgate is finished.
Safety security measures, as well as tools for pre-setup parts preparation( examine the completeness of the devices) ， Before loading the vehicle, a layer of fabric, is laid on the rear door of the automobile. Stop the scratching of the body ， Take out the item and install the device[what is power liftgate].
1. Eliminate the original trim panel as well as the spreader
2. Remove the initial vehicle right pole as well as mount our right pole
3. Mount the original cart round head
4. Get rid of the initial car left-brace as well as install our left brace
5. Set up the original cart round head
6. Pierce the opening with our drill, and also our hall cable passes through this hole to the end door cover plate (the same left-right actions). Stick a waterproof rubber plug.
7. Installation total schematic.
8. Punch openings in the main drive trim and install our front button
9. Eliminate the trim plate at the appropriate side of the back tail, discover the original vehicle wiring screw and connect to our ground wire[get this].
10. Eliminate the trim plate on the right side of the rear tail, locate the initial vehicle power, unplug the initial vehicle fuse, plug in our power outlet.
11. Eliminate the lock catch of the initial vehicle and also mount the electric suction of our company
12. Electric motor installation setting
13. The Hall cable, main control cable, as well as power cord, are inserted into our control box according to the shade.
14. Set up the rear door button of our business
