Disclaimer: This is a user generated content submitted by a member of the WriteUpCafe Community. The views and writings here reflect that of the author and not of WriteUpCafe. If you have any complaints regarding this post kindly report it to us.
Connect your Wavlink WING 12M Extender setup to your router's WiFi network, plug it in to a power outlet nearby, and then open a web browser to view the setup screen. To configure the extender settings, including connecting to your current WiFi network, follow the on-screen instructions. Once set up, the extender will improve WiFi coverage so that you can connect more easily throughout your house or place of business.
Wavlink Wing AC1200 12M Range Extender-Manual method
- Near the router, plug in the Wavlink Wing AC1200 12M extender.
- Link the device to the extender's WiFi network.
- open the web browser and go to “ap.setup.”
- Use the default login information to log in or register for a new account.
- To configure the extender's settings, including choosing the password and existing WiFi network, simply follow the setup process.
- After setting up, join devices on a larger WiFi network for better coverage.
Note:_ If you need any assistance regarding your wavlink wing 12m wifi extender login so contact our technician or visit the official website that is ap setup.
Wavlink Wing 12M Extender Setup-WPS method
- Connect the Wavlink Wing 12M extender close to the router and hit the WPS button on it.
- Press the router's WPS button after two minutes.
- Hold off until the WPS LED on the extender is solid.
- Place the extender where you want it.
- To improve coverage, connect devices to an expanded WiFi network.
Login Wavlink Wing 12M WiFi Range Extender
- Connect the WiFi network of the Wavlink Wing 12M extender.
- Open a browser and enter “ap.setup” or 192.168.10.1.
- Use the default login information or register for a new account.
- Open the settings interface on the extender.
- Change the parameters as required.
- After making changes, log out.
Wavlink Wing AC1200 Extender-Firmware Update
- Open a web browser and connect to a WiFi connection with the Wavlink Wing AC1200 extender.
- In the address bar, type “ap.setup” or “192.168.10.1.”
- Continue to the firmware update area after logging in with your credentials.
- Get the most recent firmware by visiting Wavlink's website.
- To finish the upgrade, upload the firmware file and follow the on-screen instructions.
Wavlink Wing AC1200 12M Reset
- Find the Wavlink Wing AC1200 extender's reset button.
- Use a paperclip or other similar item to press and hold the reset button for approximately ten seconds.
- The moment the LED lights begin to blink, release the button.
- Wait for the reboot and factory reset of the extender.
